.: FOLLOWING GUIDELINES HAVE TO BE OBSERVED ON PROPYLENE PIPES :.

• Protect the pipe from hard and sharp materials.
• The pipes that have been damaged, deformed or cracked can not be used.
• In the storage area the pipes should not lay for a long time under the sunlight.
• During welding the pipes and joining parts that have been made dirty has to be cleaned.
• The pipe should be cut only with a special scissors.
• After the welding the pipes and joining parts should not be twisted around.
• When tightening the metal connection parts excessive amount of linen should not be used. It would be more suitable to use teflon tape instead of linen
• In situations when bending is required the pipe must be heated with hot air instead of using naked flame.
• When the pipe installation is completed the impermeability testing can only be carried out until it is sealed and closed with plaster.